Suspend-state Indicator LED

Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:

1 RJ45 Dedicated IPMI LAN port

Input / Output

FAN Total of ten 4-pin PWM fans

Processor/Cache

Memory Mirroring supported

PCI-Express 3 (x16) PCI-E 2.0 slot

Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output

6 SATA hard drives supported

CPU Dual 1366-pin LGA Sockets

BIOS Type 32Mb SPI Flash EEPROM with AMI® BIOS

1x Realtek RTL8201N PHY (dedicated IPMI)

Low noise fan speed control

Winbond® WPCM450 BMC

Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

VMDq support for better performance of virtualization

QPI up to 6.4 GT/s

PCI 2.2

SYS-1026GT-TRF SuperServer 1026GT-TRF

Certification 80PLUS Platinum Certified

GPU Supports 3 GPU Cards such as NVIDIA Fermi M2090, M2070, M2050 (not included)

Supports up to 96 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory

Serial ATA 6 Serial ATA ports

Buttons Power On/Off button

Gross Weight 37 lbs (16.78 kg)

USB Keyboard support

Thermal Control for 4x Fan Connectors

Non-operating Relative Humidity: 5 to 95% (non-condensing)

4x fans with tachometer monitoring

System Reset button

Dimensions

DC Output 4 Amp @ +5V standby

CPU Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.

On-Board Devices

IPMI 2.0 with virtual media over LAN and KVM-over-LAN support

Expansion Slots

Error Detection Corrects single-bit errors

Drive Bays

Memory Type 1333 / 1066 / 800MHz ECC Registered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

UID LED

PECI

LEDs Power LED

2x Network activity LEDs

-12V: 0.6 Amp

LED Power Fail / Overheat LED

Network Controllers Intel® 82576 Dual-Port GbE Controller

Thermal Monitor 2 (TM2) support

Operating Relative Humidity: 8% to 90% (non-condensing)

Height 1.7" (43mm)

Operating Environment / Compliance

Memory Voltage 1.5 V / 1.35V

DIMM Sizes 1GB, 2GB, 4GB , 8GB , 16GB

Fans 10x 4cm heavy duty counter-rotating fans with optimal fan speed control

AC Input 100-240 V, 50-60 Hz, 12-8.5 Amp

Power Supply

Intel® I/OAT 3 support for fast, scaleable, and reliable networking

PSU I2C temperature sensing logic

Motherboard X8DTG-QF+

Video 1 VGA Connector

Hard drive activity LED

LAN 2 RJ45 LAN ports

Non-operating Temperature: -40° to 70° C (-40° to 158° F)

+3.3V: 24 Amp

Clock Generator 932S421 chip

Temperature Monitoring for CPU and chassis environment

SATA Intel ICH10R SATA 3.0Gbps Controller

Power 1800W (1+1) Redundant 1800W power supply with PMBus

Hot-swap 4x 2.5" Hot-swap SATA drive bays

Other Features SDDC Support

System Overheat LED / Fan fail LED / UID LED

System BIOS

System Memory

Available Color Black

Front Panel

Product SKUs

Depth 30.6" (777mm)

System Cooling

Backplane SAS/SATA HDD Backplane (SAS support requires optional SAS controller)

ACPI up to 3.0

BIOS Features Plug and Play (PnP)

CPU Core 6-Phase-switching voltage regulator

Model CSE-118G-R1800B

Graphics Matrox G200eW 16MB DDR2

Environmental Spec. Operating Temperature: 10° to 35° C (50° to 95°F)

RAID 0, 1, 5, 10 support

With a Popular Power Distributor +5V: 30 Amp

PC Health Monitoring

Intel® Xeon® Processor X5500/E5500/L5500 Series (Nehalem-EP) 38W - 95W

Form Factor 1U Rackmount

Memory Capacity 6x 240-pin DIMM sockets

IPMI Support for Intelligent Platform Management Interface v.2.0

Width 17.2" (437mm)

Serial Port 1 Serial header

Detects double-bit errors (using ECC memory)

Status monitor for speed control

CPU thermal trip support

Chipset Dual Intel® 5520 (Tylersburg) chipset + PLX 8647 + ICH10R

Chassis

Status monitor for on/off control

Super I/O Winbond W83527HG chip

1 (x8) PCI-E 2.0 (in x16) low-profile slot via riser card

RoHS RoHS Compliant

150 Amp @ +12V

USB 2 rear USB 2.0 ports

Intel® Xeon® Processor X5600/E5600/L5600 Series (Westmere) 40W - 130W